Ans. Solar energy takes advantage of the sun's rays to generate heat or electricity. It is an infinitely renewable resource and unique for its ability to generate energy in a quiet, clean, and consistent manner.
Ans. Sunlight on photovoltaic modules produces direct current (DC) electricity, which is converted to alternating current (AC) by a device called an inverter, which is then wired into your main service panel where it feeds your internal power grid.
Ans. In layperson terms, photovoltaic cells are comprised of a semiconductor material such as silicon. Added to the silicon are the elements phosphorous and boron, which create conductivity within the cell and activate the movement of electrons. The electrons move across the cell when activated by the sunlight's energy into the electrical circuit hooked up to the solar panel.
Ans. The size of the system is usually directly proportional to the amount of power you use. As part of the proposal process Enkay Solar Power (ESP) will perform a site assessment, analyze at least twelve months' worth of utility statements, and raise the question of near-term (3-5 year) expansion and business plans. With that information, taking into account the specifications and limitations of the components, www.enkaysolarpower.com will present recommendations for your input and feedback the goal of making sure you feel the ultimate path chosen is ideal.
Ans. It depends. Roof-mounted tends to be less expensive as they require no support structures and are most often not visible to passersby. On the other hand, ground-mounted systems can usually be oriented and tilted to optimize production. Through understanding your business and your needs, ESP will present a solution that optimizes for your business and your needs.
Ans. Unlike the early days of solar power when systems had to be sized for peak loads, a grid-connected PV system seamlessly switches to draw from the utility grid when needed. As such, ESP uses an annual production target, averaging out sunnier days with cloudy days.
Ans. Is back-up power critical to your business or house? For most businesses, the answer is "no" and if you don't have a back-up solution today, an ordinary grid-connected PV system will leave you in the same position. However, if you require back-up power or are looking to upgrade your business's disaster preparedness, ESP can design a battery storage solution for your PV system to automatically switchover in the event of a power outage. Most customers inquire about batteries and ultimately choose to do without based on cost.
Ans. We frequently take into account future growth plans when designing your system. The choice of inverter can be influenced by near-term expectations about power usage and in some cases it may make sense to include excess capacity now and simply add more modules later.
Ans. ESP PV systems typically weigh no more than 3-4 lbs/sq ft, and most roofs can accommodate 2-3 times that amount of 'dead load' weight and your specific roof load capacity will be taken into account with our proposed design.
Ans. Rebates vary from year to year depending on the funding for particular programs and the size of the PV system. www.enkaysolarpower.com will give you the most current information and include that in your proposal.
Ans. The best source of financing is usually the bank or finance company that you currently work with. If you like, we're happy to make arrangements. Please contact 1800 102 2230(Toll Free)
Ans. The size of the system is the largest determinant of the price, and the savings rise accordingly. In most cases, the payback period for the investment in a photovoltaic system is 2-3 years.
Ans. Photovoltaic systems are exempt from property taxes in India.
Ans. Yes, it's relatively commonplace for property owners to allow their tenants to make improvements in their facilities.
Ans. We frequently coordinate our work with roofers to ensure warranties remain in force and the PV system installation also comes with a 5-year warranty which includes roof integrity.
Ans.Yes. If you're planning to replace your roof in the next few years, it may make sense to move that up and install the PV system at the same time as the new roof is going on.
Ans. Spot repairs are easily accommodated as any since module is secured with only four 5/16" hex bolts. Non-penetrating ballasted systems can also easily be moved to accommodate repairs.
Ans. We always need an electrical permit from the city or county and some require a building permit as well. ESP and our licensed installers will handle all of this, from applications to inspections.
Ans. This depends mostly on the size of the system, site access, and the distance between the array(s) and the main service. In general, figure one week for each hundred modules to be installed.
Ans. Most work is conducted on the site of the array installation (roof or ground) so your operations will likely not be impacted. We coordinate our efforts with your team, from deliveries, securing equipment, to crane usage. For example, we always schedule the final tie-in around your schedule.
Ans. Solar PV systems are solid-state technology, have no moving parts and require no maintenance beyond cleaning, which can typically be done with a garden hose. Most systems should be cleaned 2-4 times a year, concentrated in the drier seasons. Systems in agricultural areas will likely require monthly cleaning. (We have an automated washing solution – ask us about it.) Inverters are also solid state and require little to no maintenance beyond regularly checking the cooling fan outlets and cleaning when necessary. Mounting hardware is either aluminum or stainless steel and is rustproof.
Ans. A garden hose will typically do, though some customers prefer to use a high-pressure sprayer from the ground when the array is accessible.
Ans. The inverter(s), which typically have a useful life of 15-20 years, will be the first thing to fail.
Ans. All hardware is made for outdoor use and is made of either rust-proof stainless or galvanized steel or aluminum.
Ans. Solar panels are flat panels of photovoltaic arrays mounted on a roof or a pole to capture the sun's rays. Building integrated photovoltaic materials are PV arrays that are integrated into the building material itself, primarily windows, roof tiles, or walls. Solar panels work well for retrofits or remodels while BIPV are appropriate for new construction or a major renovation.
Ans. Numerous studies indicate it takes 2-3 years to generate as much power as is required to manufacture photovoltaic, and the Environmental Working Group's Green Energy Guide reports an energy return on investment for photovoltaic of 9-to-1, greater than most other electricity sources (i.e., coal: < 8:1, wind: 5:1, nuclear:
Ans. There's less documentation on this than the energy return on investment question, suggesting it's probably not an issue, but the Environmental Working Group's Green Energy Guide reports the manufacturing and operation of photovoltaic creates far less emissions than any other source of electricity analyzed.
Ans. A 2kW solar electric system will cost approximately Rs200000. That total includes the cost for all components – solar panels, panel mounts, and inverter – and labor associated with installation.
Ans. It depends, in part, on how much electricity you use and how efficient the appliances are that you operate. That said expect to generate excess electricity in the summer (when days are long) which can potentially offset the energy you use from the grid in the winter. A combination of energy efficient appliances and light bulbs can help reduce your homes energy bill by over two-thirds.
Ans. While both types of solar systems capture energy from the sun, solar photovoltaic systems use photovoltaic panels to produce electricity. Solar hot water, or thermal, systems capture sunlight to heat water for domestic use, to heat a swimming pool, or for a radiant heating system.
Ans. Solar hot water systems, broadly termed solar thermal systems, use the sun's energy to heat water. Solar hot water systems can be used to heat a hot water tank or to warm a home's radiant heating system. Swimming pools and hot tubs use a modified solar hot water system for heating water.
Ans. Pool heating systems use a modified solar hot water system to capture the sun's rays to heat your pool or hot tub
Ans. Solar photovoltaic panels require little maintenance – no need to wash or dust. It is, however, important to place panels where they will remain clear of shade and debris. Thus you will have to wipe them off if too much snow or leaves fall on them. Solar hot water collection arrays don't need much attention either. It does help to periodically use a window wash brush, biodegradable soap, and water to clean the tubes.
Ans. Yes. Consider using a home equity loan for the purchase and installation costs of a solar photovoltaic or solar hot water system to take full advantage of tax deductions. Solar energy systems are viewed as a major home energy savings upgrade and there are financial tools out there that reward you for your efforts. Remember, installing a solar energy system is comparable to any other upgrade you might do to your home, such as installing a new deck or remodeling a kitchen.
Ans. Standard homeowner's insurance policies usually suffice to meet electric utility requirements. Electric utilities usually require that homeowners who take advantage of net metering sign an interconnection agreement.
Ans. Yes. You'll need to obtain building permits to install a solar photovoltaic or solar hot water system. Similarly, building, electrical, and plumbing codes also apply. That said, residential solar power systems do not use "radical" building techniques and most jurisdictions have building codes that fully embrace solar energy technology. Solar professionals will roll the price for permits into their cost estimate.
Ans. There are plenty of resources out there. If you happen to be one of the first in your area to install a solar PV system, you can work with us & local building officials to successfully install your photovoltaic system.
Ans. Although solar energy systems work in parallel with conventional residential electrical and plumbing systems, there are quirks in the process well suited to seeking out professionals who specialize in solar power installation. Solar installation professionals can help you determine the type and size of system most suited for your needs.
Ans. Solar professional installers can take the guesswork out of installing a solar power system. Whether you are considering solar photovoltaic, solar hot water, or solar heat for your pool, a www.enkaysolarpower.com can help you determine the type and size of system that will work best and guide you through the process.
Ans. You can estimate how much a solar electric or solar hot water system may cost if you determine your current energy needs and costs and compare against your future anticipated use. Once you have a sense of how much energy you use, you can evaluate the cost of purchasing and installing one or both of the technologies. Luckily in today's market you can take advantage of taxation, credits, rebates and other financial incentives that create attractive and competitive prices for solar PV and hot water systems.
Ans. Planning, configuring, and doing any custom ordering for your solar energy system can take up to a few weeks. However, the installation process itself can typically be completed in only a few days time, in many cases even less.
Ans. www.enkaysolarpower.com saves you time, money, and headaches by buying quality products. We have highly experienced solar professionals with a track record of success and satisfied customers. We encourage you to look around our site for all the information you need on solar energy installation. When you're ready, all you need to do to get started is tell us about your project, and you can be assured you'll receive competitive bids.
Ans. You will need a photovoltaic array to capture the sun's energy, an inverter to convert the direct current (DC) produced from the photovoltaic cells into alternating current (AC) used by your home, and a house utility meter – called a net meter – that can record both the electricity produced from your home's power system as well as any power you may use off the grid. These three system components are then connected through a series of wiring. The photovoltaic panels are secured to your roof with panel mounts or are installed on poles that can be adjusted for sun angle.
Ans. Net meters look very much like other outdoor meters with one notable exception – they spin both forwards and backwards recording both the power produced and power used.
Ans. Probably not – a backup battery bank can add as much as 25% in cost to a residential solar PV system. It's not necessarily more efficient either – a same sized solar array will yield about 7–10% less energy if it's battery-tied than its grid-tied counterpart. Though you will remain tethered to your local utilities' grid, you will not have to worry about not generating enough power. You also gain the advantage of offsetting rising utility costs. Most solar photovoltaic experts do not recommend adding a backup battery system unless there is concern about a long utility outage or the residence is in a remote location.
Ans. In bright sunlight, a square foot of a conventional photovoltaic panel will yield 10 watts of power. That's a helpful rule of thumb for calculating a rough estimate of how much area you might need. For example, a 1000 watt system may need 100 – 200 square feet of area, depending on the type of PV module used.
Ans. The size of the photovoltaic system is correlated to your home's energy-use needs, available space for a system, and overall costs for the system components and installation.
Ans. Unfortunately shading a photovoltaic system dramatically decreases its output. Just shading the bottom row of wafers alone amounts to an 80% reduction in efficiency. So above all, don't shade your array!
Ans. Although southern exposure increases the effectiveness of a residential solar power system, your home may still work for solar power without having south facing exposure. Seek advice from a professional solar designer or installer to ensure success.
Ans. The location of your home and the local climate will play into where you place and how you install your solar electric or solar hot water system. Wind speeds, heavy snow loads, and salt water can all affect a solar array. Understanding how those inputs effect performance will determine the types of mounts or how the arrays are angled.
Ans. For more info please visit http://www.ireda.gov.in
Ans. For more info please visit http://www.ireda.gov.in